Interfaces
ANTA catalog for interfaces tests¶
Test functions related to the device interfaces
VerifyIPProxyARP ¶
Bases: AntaTest
Verifies if Proxy-ARP is enabled for the provided list of interface(s).
Expected Results
- success: The test will pass if Proxy-ARP is enabled on the specified interface(s).
- failure: The test will fail if Proxy-ARP is disabled on the specified interface(s).
- error: The test will give an error if a list of interface(s) is not provided as template_params.
Source code in anta/tests/interfaces.py
378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 |
|
test ¶
test() -> None
Run VerifyIPProxyARP validation.
Source code in anta/tests/interfaces.py
394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 |
|
VerifyIllegalLACP ¶
Bases: AntaTest
Verifies there is no illegal LACP packets received.
Source code in anta/tests/interfaces.py
221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 |
|
test ¶
test() -> None
Run VerifyIllegalLACP validation
Source code in anta/tests/interfaces.py
231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 |
|
VerifyInterfaceDiscards ¶
Bases: AntaTest
Verifies interfaces packet discard counters are equal to zero.
Source code in anta/tests/interfaces.py
70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 |
|
test ¶
test() -> None
Run VerifyInterfaceDiscards validation
Source code in anta/tests/interfaces.py
80 81 82 83 84 85 86 87 88 89 90 91 92 93 |
|
VerifyInterfaceErrDisabled ¶
Bases: AntaTest
Verifies there is no interface in error disable state.
Source code in anta/tests/interfaces.py
96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 |
|
test ¶
test() -> None
Run VerifyInterfaceErrDisabled validation
Source code in anta/tests/interfaces.py
106 107 108 109 110 111 112 113 114 115 116 117 |
|
VerifyInterfaceErrors ¶
Bases: AntaTest
Verifies interfaces error counters are equal to zero.
Source code in anta/tests/interfaces.py
45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 |
|
test ¶
test() -> None
Run VerifyInterfaceUtilization validation
Source code in anta/tests/interfaces.py
55 56 57 58 59 60 61 62 63 64 65 66 67 |
|
VerifyInterfaceUtilization ¶
Bases: AntaTest
Verifies interfaces utilization is below 75%.
Source code in anta/tests/interfaces.py
12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 |
|
test ¶
test() -> None
Run VerifyInterfaceUtilization validation
Source code in anta/tests/interfaces.py
23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 |
|
VerifyInterfacesStatus ¶
Bases: AntaTest
Verifies the number of Ethernet interfaces up/up on the device is higher or equal than a value.
Source code in anta/tests/interfaces.py
120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 |
|
test ¶
test(minimum: Optional[int] = None) -> None
Run VerifyInterfacesStatus validation
Parameters:
Name | Type | Description | Default |
---|---|---|---|
minimum |
Optional[int]
|
Expected minimum number of Ethernet interfaces up/up. |
None
|
Source code in anta/tests/interfaces.py
130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 |
|
VerifyL3MTU ¶
Bases: AntaTest
Verifies the global layer 3 Maximum Transfer Unit (MTU) for all layer 3 interfaces.
Expected Results
- success: The test will pass if all layer 3 interfaces have the proper MTU configured.
- failure: The test will fail if one or many layer 3 interfaces have the wrong MTU configured.
- skipped: The test will be skipped if the MTU value is not provided.
Limitations
- Only Ethernet, Port-Channel, Vlan interfaces are supported.
- Other interface types, like Management, Loopback, Vxlan, Tunnel are currently not supported.
Source code in anta/tests/interfaces.py
324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 |
|
test ¶
test(mtu: int = 1500) -> None
Run VerifyL3MTU validation
Parameters:
Name | Type | Description | Default |
---|---|---|---|
mtu |
int
|
Layer 3 MTU to verify. Defaults to 1500. |
1500
|
Source code in anta/tests/interfaces.py
348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 |
|
VerifyLoopbackCount ¶
Bases: AntaTest
Verifies the number of loopback interfaces on the device is the one we expect and if none of the loopback is down.
Source code in anta/tests/interfaces.py
249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 |
|
test ¶
test(number: Optional[int] = None) -> None
Run VerifyLoopbackCount validation
Parameters:
Name | Type | Description | Default |
---|---|---|---|
number |
Optional[int]
|
Number of loopback interfaces expected to be present. |
None
|
Source code in anta/tests/interfaces.py
259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 |
|
VerifyPortChannels ¶
Bases: AntaTest
Verifies there is no inactive port in port channels.
Source code in anta/tests/interfaces.py
193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 |
|
test ¶
test() -> None
Run VerifyPortChannels validation
Source code in anta/tests/interfaces.py
203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 |
|
VerifySVI ¶
Bases: AntaTest
Verifies there is no interface vlan down.
Source code in anta/tests/interfaces.py
294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 |
|
test ¶
test() -> None
Run VerifySVI validation
Source code in anta/tests/interfaces.py
304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 |
|
VerifyStormControlDrops ¶
Bases: AntaTest
Verifies the device did not drop packets due its to storm-control configuration.
Source code in anta/tests/interfaces.py
163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 |
|
test ¶
test() -> None
Run VerifyStormControlDrops validation
Source code in anta/tests/interfaces.py
173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 |
|